Buy bearings in Kenya for motors, pumps, fans, conveyors and machines. Shop 6000 series deep groove ball bearings by number, plus angular contact, roller, tapered, spherical, thrust, linear, rod end and insert bearings. Compare bearing types below.
Shop by bearing number
Shop by type
Ball bearings
Spherical plain and rod ends
Linear, insert and freewheel
Showing 1–24 of 61 results
Bearing types compared
| Type | Radial load | Axial load | Speed | Typical uses |
|---|---|---|---|---|
| Deep groove ball | Good | Light, both directions | High | Electric motors, pumps, fans, gearboxes |
| Angular contact ball | Good | Good, one direction | High | Pumps, spindles, ball screws |
| Self-aligning ball | Moderate | Light | High | Shafts with some misalignment |
| Cylindrical roller | Very high | Little or none | High | Large motors, gearboxes |
| Tapered roller | High | High, one direction | Moderate | Wheel hubs, gearboxes, heavy shafts |
| Spherical roller | Very high | Moderate | Moderate | Conveyors, crushers, vibrating screens |
| Thrust ball / roller | None or little | High | Low to moderate | Vertical shafts, turntables |
| Spherical plain / rod end | Oscillating loads | Some | Low | Linkages, cylinders, steering |
| Linear | Along a shaft or rail | n/a | Linear motion | Machines, 3D printers, slides |
| Insert (UC) | Good | Light | Moderate | Pillow block units on conveyors and fans |
6000 series size chart
For 6004 and above, the bore in millimetres is the last two digits times 5. Read the number stamped on your old bearing and match it here. Dimensions below are the standard ISO sizes for the 60 series.
| Bearing no. | Bore x OD x width (mm) | Page |
|---|---|---|
| 6000 | 10 x 26 x 8 | View 6000 |
| 6001 | 12 x 28 x 8 | View 6001 |
| 6002 | 15 x 32 x 9 | View 6002 |
| 6003 | 17 x 35 x 10 | View 6003 |
| 6004 | 20 x 42 x 12 | View 6004 |
| 6005 | 25 x 47 x 12 | View 6005 |
| 6006 | 30 x 55 x 13 | View 6006 |
| 6007 | 35 x 62 x 14 | View 6007 |
| 6008 | 40 x 68 x 15 | View 6008 |
| 6009 | 45 x 75 x 16 | View 6009 |
| 6010 | 50 x 80 x 16 | View 6010 |
| 6011 | 55 x 90 x 18 | View 6011 |
| 6012 | 60 x 95 x 18 | View 6012 |
| 6013 | 65 x 100 x 18 | View 6013 |
| 6014 | 70 x 110 x 20 | View 6014 |
| 6015 | 75 x 115 x 20 | View 6015 |
| 6016 | 80 x 125 x 22 | View 6016 |
| 6017 | 85 x 130 x 22 | View 6017 |
| 6018 | 90 x 140 x 24 | View 6018 |
| 6019 | 95 x 145 x 24 | View 6019 |
| 6020 | 100 x 150 x 24 | View 6020 |
| 6021 | 105 x 160 x 26 | View 6021 |
| 6022 | 110 x 170 x 28 | View 6022 |
| 6023 | Not a standard 60 series size; confirm with us | View 6023 |
| 6024 | 120 x 180 x 28 | View 6024 |
| 6025 | Not a standard 60 series size; confirm with us | View 6025 |
| 6026 | 130 x 200 x 33 | View 6026 |
| 6027 | Not a standard 60 series size; confirm with us | View 6027 |
| 6028 | 140 x 210 x 33 | View 6028 |
| 6029 | Not a standard 60 series size; confirm with us | View 6029 |
| 6030 | 150 x 225 x 35 | View 6030 |
Common bearing suffixes
| Suffix | Meaning |
|---|---|
| ZZ / 2Z | Metal shields on both sides |
| 2RS / 2RS1 | Rubber seals on both sides |
| C3 | Greater internal clearance than normal, common in electric motors |
| N / NR | Snap ring groove / with snap ring |
Frequently asked questions
How do I find the right bearing?
Read the number on the old bearing, for example 6205 2RS C3, and send it to us. If the number is worn, measure the bore, outside diameter and width in millimetres.
What does 6000 series mean?
It is a light series of single row deep groove ball bearings. The last digits give the bore size.
What is the difference between ZZ and 2RS?
ZZ bearings have metal shields; 2RS bearings have rubber seals that keep out more dust and water but run slightly warmer.
Which bearing takes heavy axial load?
Tapered roller, angular contact and thrust bearings are designed for axial load. Deep groove ball bearings take only light axial load.
Why do bearings fail early?
Common causes are poor fitting, misalignment, wrong or too much grease, contamination and overloading.
How do I order bearings?
Send the bearing number and quantity on WhatsApp 0726 086 895.
Need bearings? Send the type, size and quantity on WhatsApp 0726 086 895 or email sparksplumbingexperts@gmail.com, and we will confirm what is available from Enterprise Road, Industrial Area, Nairobi.
























