Buy stainless steel in Kenya: pipes by size, Schedule 40 pipe, threaded fittings, branch outlets, flexible pipes, sheets, tubes, threaded rods and balustrade fittings. Compare stainless grades and welded vs seamless pipe below.
Shop by size
Shop by type
Stainless steel threaded fittings
Branch outlets and weld fittings
Carbon and mild steel fittings
Balustrade and architectural
Sheets and tubes
Showing 1–24 of 79 results
Stainless steel grades compared
| Grade | Make-up | Corrosion resistance | Typical uses |
|---|---|---|---|
| 201 | Lower nickel, more manganese | Fair; best indoors and dry | Decorative tube, furniture, indoor trim |
| 304 | Standard 18/8 chromium nickel | Good for most water and food duties | Food plants, kitchens, water lines, balustrades |
| 316 | 304 plus molybdenum | Better against chlorides and many chemicals | Coastal sites, chemical lines, pharmaceutical, marine |
Welded vs seamless pipe
| Welded pipe | Seamless pipe | |
|---|---|---|
| How it is made | Rolled from strip and welded along its length | Pierced from a solid billet, no weld seam |
| Strength | Suitable for most water and low pressure duties | Preferred for high pressure and critical service |
| Cost | Usually lower | Usually higher |
| Typical uses | Water, food, balustrades, structures | Steam, hydraulics, process lines |
Stainless pipe size chart
Our stainless pipe pages are listed in inches and our Schedule 40 pages in millimetres (DN). This chart lines them up, and each pipe page links to its equivalent.
| Nominal size | DN | Stainless steel pipe (inch range) | Schedule 40 (mm range) |
|---|---|---|---|
| 1/4 inch | DN8 | View | Not listed |
| 3/8 inch | DN10 | Not listed | View 10 mm |
| 1/2 inch | DN15 | View | View 15 mm |
| 3/4 inch | DN20 | View | View 20 mm |
| 1 inch | DN25 | View | View 25 mm |
| 1 1/4 inch | DN32 | View | View 32 mm |
| 1 1/2 inch | DN40 | View | View 40 mm |
| 2 inch | DN50 | Not listed | View 50 mm |
| 2 1/2 inch | DN65 | Not listed | View 65 mm |
| 3 inch | DN80 | View | Not listed |
| 4 inch | DN100 | View | Not listed |
Wall thickness, grade and length depend on the batch. Confirm them with your quote.
Frequently asked questions
What is the difference between 304 and 316 stainless steel?
316 contains molybdenum, which improves resistance to chlorides such as salt water and many chemicals. 304 is the standard grade for most food and water uses.
Is grade 201 stainless steel good?
It is lower cost and fine for dry, indoor and decorative uses. For wet, outdoor or food contact duties, 304 or 316 is the usual choice.
What does Schedule 40 mean?
It is a wall thickness series for a given nominal pipe size. Higher schedules have thicker walls.
What is DN?
DN is the nominal size in millimetres used in metric standards. For example, DN15 matches 1/2 inch nominal pipe.
Do you supply stainless steel fittings?
Yes, including elbows, nipples, sockets, caps, plugs, bushings, branch outlets and steel pipe fittings.
How do I order stainless steel?
Send the grade, size, schedule or thickness and quantity on WhatsApp 0726 086 895.
Need stainless steel? Send the type, size and quantity on WhatsApp 0726 086 895 or email sparksplumbingexperts@gmail.com, and we will confirm what is available from Enterprise Road, Industrial Area, Nairobi.
























